Filter
Top Products
19
ENG
●
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's
remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an
HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+.
Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 18)
Set the Anynet+ function on your TV.
(See the TV instructions manual for more information.)
You can operate the volume on the AV receiver by using Volume buttons on the TV remote
control.
Set the Anynet+(HDMI-CEC) to by pressing the Anynet+ button on your TV.
: : You can listen to audio through the AV Receiver.
: : You can listen to audio through the TV.
Select THEATER to connector and set the option of each item below.
If Anynet+(HDMI-CEC) set to on and you select View TV,
the AV receiver will automatically switch to SAT
OPTIC2(DIGITAL IN).
You can listen to audio through the AV receiver.
You can listen to audio through the TV.
Press SETUP/MENU button, and then press the ENTER button.
“SETUP MODE” appears on the display and goes into Setup Mode.
Press ◀▶ button to select the “ANYNET+ MODE”, and then press the button.
Press the ▲▼button to set ANYNET+ to OFF.
- If you are using Anynet+, set ANYNET+ to ON and if not, set it to OFF.
Press button.
“SETUP OFF” appears on the display and Setup Mode is exited.
If you use an HDMI cable to connect a Samsung TV to your AV Receiver, you can operate the AV receiver using
the TV’s remote control. This function is available only in connection with Samsung TV and DVD player
supporting Anynet +(HDMI-CEC).
Please check your TV for the n logo. If your TV has an n logo, then it supports the Anynet+
function.
When you are making Anynet+ connection, do not connect more than two AV receivers (Anynet+ installed).
Otherwise, it can cause a malfunction.
Anynet+ does not work if the function is set to iPod AUDIO.
~
~
~
~
~
~
~
3.
~
M
`
`
`
`
Move
Enter
Exit
Setup
Connected to Player
Off
On
View TV
THEATER
THEATER Menu
View TV
DVDR 1 Menu
DVDR 1 Operation
Receiver : On
Connect DVDR 2
Setup
Receiver : On
Connect DVDR 1
Connect DVDR 2
Setup
DVDR 1
DTV Air 11-1
MOVE
ENTER
EXIT
MOVE
ENTER
EXIT
Move
Enter
Exit
Setup
Connected to Player
Off
On
View TV
THEATER
THEATER Menu
View TV
DVDR 1 Menu
DVDR 1 Operation
Receiver : On
Connect DVDR 2
Setup
Receiver : On
Connect DVDR 1
Connect DVDR 2
Setup
DVDR 1
DTV Air 11-1
MOVE
ENTER
EXIT
HT-AS730S-XAC_0213.indd 19 2009-02-16 �� 5:06:22