Filter
Top Products
46
You can listen to sound in 2 channel analog , Dolby Digital or DTS using this unit.
Press the INPUT MODE button on the remote control to select the external device
you have connected.
Each time you press this button, input mode changes as follows:
You can also change input mode by pressing the INPUT MODE button on the front of your AV Receiver.
You can change the detailed input setting in the “INPUT” setup. (See page 32)
You can enjoy Dolby Digital or DTS if you connect the digital audio output jack of an external audio component to the optical
or coaxial digital audio input jack on the main unit.
~
M
`
`
`
HT-AS730S-XAC_0213.indd 46 2009-02-16 �� 5:07:21