Samsung HT-AS730S Stereo Receiver User Manual


 
40


When surround back speakers are connected, you can listen to 6.1 or 7.1 multi-channel sound using the built-in
Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source (such as a
DVD player) is input, and does not work with L.PCM and Dolby Digital 2 channel sources.
Press SETUP/MENU button.
“INPUT” appears on the display and goes into Setup Mode.
Press
▲▼
button to select "SURROUND", and then press the
ENTER.
Press
▲▼
button to select the “EX / ES”, and then press the
ENTER or
button.
“EX/ES : AUTO” appears on the display.
Press
▲▼
button to set the EX/ES you want.

If the unit receives an audio signal that it can
recognize, it will select an optimal decoder for playback in
6.1/7.1 channel.
If the amplier does not recognize the audio signal, it will not
play in 6.1/7.1 channel automatically.

Dolby Digital or DTS signal will be played in 6.1 / 7.1
channel using Dolby Digital Surround EX / DTS ES decoder.

Dolby Digital Surround EX / DTS ES decoder will not be used for playback.

Press   button.
“SETUP OFF” appears on the display and Setup Mode is exited.

Movie soundtracks encoded with Dolby Digital EX will play audio over the surround back channels also.

A surround back channel is added to the DTS 5.1 channel system, improving the sense of sound
directionality and space.
A built-in DTS-ES decoder has been equipped with this system that supports discs encoded with DTS-
ES Direct and DTS-ES Matrix.
You cannot use DTS-ES without surround back speakers connected.
If the input source is in DTS 96/24, you will hear only 5.1 CH sound even if you have set EX/ES to
On.

~


~

~
~
~
~
M
`
`
HT-AS730S-XAC_0213.indd 40 2009-02-16 �� 5:07:03