Filter
Top Products
System Info (Chassis)
The System Info menu shows the ST2 Tuner’s
manufacturing build properties.
1. Enter the Setup Menu by pressing and holding
the SELECT button.
2. TUNER SETUP appears. Press MEM Up/Down
until SYSTEM INFO appears on the tuner.
3. Press MODE/BAND.
4. Press MODE/BAND at “Build Time” to view.
5. Press MEM Up/Down to advance.
6. Press MODE/BAND at “Build Date” to view.
7. Press MEM Up/Down to advance.
8. Press MODE/BAND at “Version” to view.
9. Press SELECT to exit the System Info menu.
(END OF ST2 CHASSIS SETUP)
Tuner Setup Menu for SIRIUS
It is important to select the desired tuner
(Tuner 1 for SIRIUS) using the SELECT
button BEFORE accessing the Tuner Setup
Menus.
Memory Name (SIRIUS)
A memory preset
must
be created and saved
before it can be named (see page 21). Once it is
saved, the preset’s Tuner #, Bank # and Memory
# must be entered in the following procedure.
1. Enter the Setup Menu by pressing and holding
the SELECT button.
2. TUNER SETUP appears. Press MODE again.
3. MEMORY NAME appears on the tuner.
4. Press MODE/BAND.
5. Bank # appears.
6. Press the Tune Up/Down buttons to select the
Bank #.
7. Press MODE/BAND to advance. Memory #
appears.
8. Press the Tune Up/Down buttons to select a
Memory #.
9. Press MODE/BAND to advance. MEMORY
NAME appears again.
10. Press MODE/BAND to access the Memory
Name entry screen.
11. Press Tune Up/Down to select a character
and MEM Up/Down to change a character
position. Up to 12 characters can be entered
one by one. A blinking cursor indicates the place-
ment of the character being entered.
12. Press MODE/BAND when memory name is
entered.
13. SAVE CHANGES will appear.
14. Press Tune Up/Down to select Yes or No.
15. Press MODE/BAND to save memory name.
The Memory Name menu returns to the Memory
# prompt to name other presets, or press
SELECT to return to the Memory Name menu
start.
Bank Name (SIRIUS)
A custom name can be assigned to each of the
six banks of Tuner 1 (SIRIUS).
1. Enter the Setup Menu by pressing and holding
the SELECT button.
2. TUNER SETUP appears. Press MODE.
3. MEMORY NAME appears. Press MEM
Up/Down until BANK NAME appears on the tuner.
4. Press MODE/BAND.
5. Bank # appears.
6. Press the Tune Up/Down buttons to select the
Bank #.
7. Press MODE/BAND. BANK NAME appears
again.
8. Press MODE/BAND to access the Bank Name
entry screen.
9. Press Tune Up/Down to select a character
and MEM Up/Down to change a character posi-
tion. Up to 12 characters can be entered one by
one. A blinking cursor indicates the placement of
the character being entered.
ST2S TUNER PROGRAMMING
ST2 TUNER SETUP MENU
30