Filter
Top Products
29
ST2-XM2 TUNER PROGRAMMING
ST2 TUNER SETUP MENU
2. TUNER SETUP appears. Press BAND again.
3. MEMORY NAME appears on the tuner.
4. Press BAND.
5. Bank # appears.
6. Press the Tune Up/Down buttons to select the
Bank #.
7. Press BAND to advance. Memory # appears.
8. Press the Tune Up/Down buttons to select a
Memory #.
9. Press BAND to advance. MEMORY NAME
appears again.
10. Press BAND to access the Memory Name
entry screen.
11. Press Tune Up/Down to select a character
and MEM Up/Down to change a character
position. Up to 12 characters can be entered
one by one. A blinking cursor indicates the place-
ment of the character being entered.
12. Press BAND when memory name is entered.
13. SAVE CHANGES will appear.
14. Press Tune Up/Down to select Yes or No.
15. Press BAND to save memory name. The
Memory Name menu returns to the Memory #
prompt to name other presets, or press TNR
SEL to return to the Memory Name menu start.
Press TNR SEL
button to select
XM Tuner
BANK #
BANK
NAME
SAVE
CHANGES?
XM Setup Menu
Bank Name Procedure
TNR
SEL
Selects
character
Selects
character
position
Repeat
for each
character
in name
TNR
SEL
TNR
SEL
MEM
NAME
Procedure
TNR
SEL
BANK
NAME
Procedure
XM
Setup
Menu
FACTORY
INIT
Procedure
CONTROLLR
ID
Procedure
SYSTEM
INFO
Procedure
DIAGNOSTICS
Procedure
SOURCE
NUM
Procedure
FACTORY
INIT
Procedure
UPDATE
FIRMW
Procedure
SYSTEM
INFO
Procedure
TUNER
SETUP
Menu
Chassis
Setup
Menu