Filter
Top Products
20
ST2-XM2 OPERATION
ST2-KP KEYPAD CONTROLS
ST2-KP Keypad Operation
Turning the keypad on/off
To activate the ST2-KP, press . Press to
power down the keypad display. The keypad remains
powered until the ST2-XM2 Tuner is turned off.
Selecting the desired tuner
To select a different tuner, press and hold . (If the
keypad has been hardware jumper-selected to Tuner
1 or Tuner 2, it will not switch between the two
tuners.) The backlight color of the display will be
green for Tuner 1 (XM1) and amber for Tuner 2
(XM2). Each time a tuner is selected the display will
refresh with the current station or preset for that
tuner, and
all subsequent button presses and memo-
ry preset entries will be associated with that selected
tuner.
Selecting an XM mode
Push to select an XM operating mode.
Exiting an XM mode
Press and release until EXIT is displayed to exit
the XM operating mode menu.
Selecting the desired channel
Use and for manual tuning. To move quickly
through the channels, press and hold either or
for more than 1.5 seconds.
Selecting a Bank
To select a bank, select the desired tuner, then press
and hold or to select the desired bank. The
bank name will show on the display.
Recalling a Memory Preset
To recall a memory preset, press and release or
to scroll through the presets for the selected
bank. (Memory presets must be stored for ST2-KP
recall)
ST2-KP Keypad Display
The 5-character backlit display shows XM channel
and mode information. Messages scroll twice, then
display the first 5 characters.
5
4
4
3
2
2
1
1
5
3
2
1
4
ST2-KP Keypad-Front Panel
3