Filter
Top Products
6 Russound CA4 System Installation Manual
KEYpAd USAGE & FEATURES
CA4-KP User Menu
The User Menu allows the user to adjust the audio properties and features of
a particular zone. The audio features that can be adjusted are: Bass, Treble, and
Loudness. Additional features that are selectable are Source Grouping, and All
ON Participation. Source Grouping allows linked zones to listen to the same
source and follow any source changes on those linked zones. When All ON
participation is enabled, an All ON command will turn on any enabled zones
and allow the initiating keypad to act as the Master keypad and control the
source selection for all zones that are powered on.
To enter the User Menu, press and hold the Source button for 3 seconds
when the keypad is powered on. The Source windows will blink to indicate the
option ready for adjustment. Another 3-second press and hold of the Source
button (or a 9-second time-out) will return the keypad to regular operation.
The top left (Source 1) button will temporarily blink to indicate “Bass" is ready
for adjustment. Subsequent presses of the Source button will toggle through
Treble (Source 2), Loudness (Source 3), Source Grouping (Source 4) and All ON
Participation (all four Sources lit).
Once an option is selected, the Volume Up/Down buttons are used to adjust
settings. The volume indicator LEDs temporarily light to show the option
setting. A 3-second press and hold, or a 9-second time-out will return the
keypad to normal operation.
Setting Bass and Treble
Enter the User Menu.1.
Select Source 1 (upper left) for Bass or Source 2 (upper right) for Treble. 2.
The windows will blink to indicate the option for adjustment.
Press the volume up or down to adjust the settings. The LEDs above the 3.
volume up button will indicate the change. The middle LED will ash
when at.
Either press the Source button to go to the next option or exit the User 4.
Menu by a 3-second press of the source button or a time-out.
Bass Setting Mode
Treble Setting Mode
Hold Source button to
enter or exit User Menu
Press Source button to
cycle through the menu
options
Press Volume Up or
Down buttons to
adjust setting
Source window will blink to indicate the
option that is ready for adjustment
Source 2
Source 3 Source 4
Source 1
Treble
Bass
Source Grouping
Loudness
All Sources Lit
- All ON Participation