Filter
Top Products
24
INPUT SETUP Menu
INPUT SETUP
LISTEN: Video 2
INPUT LABEL: _ _ _ _ _
INPUT: Coaxial 1
SURR MODE: Dolby 3 Stereo
ENT KEY=MAIN MENU UP KEY=up
+/– KEY=change DWN KEY=down
The INPUT SETUP menu configures the source
inputs and is reached from the MAIN menu.
The screen provides the following options, se-
lected by placing the highlight on the desired
line using the UP/DOWN buttons:
LISTEN: changes the current listening input
source (CD, TUNER, TAPE, VIDEO1, VIDEO2,
VIDEO3, VIDEO4, VIDEO5).
INPUT LABEL: The labels for the five VIDEO
inputs can customized (not available for the
TUNER, CD, and TAPE inputs). Place the high-
light on this line to call up a sub-menu that al-
lows you to change the five-character label
for the current VIDEO source. To change the
label:
1. Press the +/– keys to begin labeling.
2. Press the +/– keys to change the first let-
ter, scrolling through the list of available
characters.
3. Press the ENT key to confirm that letter and
move to the next position.
4. Repeat steps 2 and 3 until all five charac-
ters have been completed. The final press
of the ENT button will save the new label
and exit the sub-menu.
INPUT: selects which physical input connec-
tion to use as the default for the source dis-
played in the first line of the menu. The op-
tions are ANALOG inputs, two OPTICAL digital
inputs (OPTICAL 1& 2), and three COAXIAL
digital inputs (COAXIAL 1 – 3). When a digi-
tal input is selected, the unit will check for a
digital signal when the INPUT SOURCE but-
ton is pressed. If no digital signal is present,
the unit will automatically revert to the ana-
log input. When an ANALOG input is selected,
the unit will not access a digital signal, even
though one may be present at the digital in-
put; thus, the ANALOG setting forces the unit
to use accept only an analog signal. Assign-
ing a digital input (with its auto-sensing) is the
preferred configuration for digital source in-
puts such as DVD players.
NOTE
: If a source connected to a digital input
is selected, that signal will automatically be
sent to both digital outputs for recording.
SURR MODE: selects the default surround
sound mode for the input shown at the top of
the menu. The default setting will be used unless
the source material triggers automatic decoding
of a particular type or unless the default set-
ting is overridden by the front panel or remote
surround buttons. Options are: Stereo, Dolby
Pro Logic II, Dolby 3-Stereo, Music 1 – 4, 5CH
Stereo, 7CH Stereo, and DTS Neo:6.
This is a default setting for each input and, in
some cases, can be manually overridden by
the front-panel MODE buttons or the SUR+
button on the remote. See the SURROUND
SOUND CONTROLS section of this manual
for more information on which settings can be
overridden.
NOTE
: The following types of discs or source
material are generally detected automatically
and the proper decoding activated with no
action or setting required: DTS, DTS-ES Ma-
trix 6.1, DTS-ES Discrete 6.1, Dolby Digital,
Dolby Digital 2-channel, PCM 2-Channel,
MP3, and HDCD.
Two of the default surround mode settings
available on this menu offer additional choices.
Dolby Pro Logic II decoding offers a choice
of CINEMA, MUSIC, or EMULATION settings.
DTS Neo:6 decoding offers a choice of CIN-
EMA or MUSIC settings. When either Dolby
Pro Logic II or DTS Neo:6 is selected with this
menu item, the current setting choice will also
be displayed. In addition, the function of the
ENTER button changes, taking you to a sub-
menu where you can change the settings and/
or additional parameters for Dolby Pro Logic
II or DTS Neo:6 decoding. See the following
section for details.
To return to the MAIN menu (except when Dolby
Pro Logic II or DTS Neo:6 is selected in the
SURR MODE field), press the ENTER button.
Press the MENU key on the remote to cancel
the menu display and return to normal opera-
tion.
NOTE
: We suggest that you return to this menu
after connecting each source component to
properly configure that source.
DTS Neo:6 Sub-Menu
DOLBY PRO LOGIC II Sub-Menu
DTS Neo:6
MODE: CINEMA
ENT KEY=input setup
+/– KEY=change
When Dolby Pro Logic II or DTS Neo:6 is
selected as the default surround mode on the
INPUT SETUP menu (see previous section), there
are additional option settings and parameters
available to optimize the surround decoding
for various types of recordings, music or movie
soundtracks.
These settings are changed using one of the
DOLBY PRO LOGIC II or DTS Neo:6 submenus,
reached by pressing the ENTER key from the
INPUT SETUP menu when either of these sur-
round modes is selected.
The sub-menu will be similar to the example
shown above, with the title at the top of the
screen indicating either DOLBY PRO LOGIC
II or DTS Neo:6 depending on the surround
mode.
In DTS Neo:6 surround mode, there will
only be one choice available on the sub-menu:
selecting CINEMA or MUSIC modes. Use the
+/– keys on the remote to change the settings.
• Select CINEMA to optimize the DTS Neo:6
decoding for movie soundtracks.
• Select MUSIC to optimize the DTS Neo:6
decoding for musical recordings.
In Dolby Pro Logic II surround mode,
there will a similar choice available on the sub-
menu except that there are three options:
CINEMA, MUSIC, or EMULATION modes. Use
the +/– keys on the remote to select a mode.
• Select CINEMA to optimize for Dolby
Surround encoded movie soundtracks, using
the enhanced matrix decoding of Dolby
Pro Logic II including increased surround
separation and full-bandwidth surround
channel frequency response.
• Select EMULATION for Dolby Surround
encoded movie soundtracks using decod-
ing logic that emulates the original Dolby
Pro Logic system. You may prefer this op-
RSP-1066 Surround Sound Processor