39
Convenient Functions
Deutsch Français Italiano PortuguêsEspañol NederlandsEnglish
Various System Settings
1. Press [MENU].
2. Use the dial to select SYSTEM, and then press [ENTER].
You can make a variety of settings for the JS-8 in the SYSTEM screen.
SYSTEM Category Description
SYSTEM SETTING Allows you to turn the internal speaker on and off and adjust the GUITAR/MIC IN jack input sensitivity.
GLOBAL EQ
Adjusts the tone of the entire JS-8.
Adjust the
midrange
volume.
Adjust the
high-end
volume.
Turns GLOBAL
EQ OFF/ON.
Adjust the
low-end
volume.
USB ( COMPUTER) Allows you to switch the USB mode and audio data routing.
SD CARD Allows you to edit the VIEW SW parameter, check the capacity, and initialize (format) the card.
USB MEMORY Allows you to confirm the capacity of the connected USB memory.
PEDAL
Allows you to assign functions to an externally connected footswitch.
”Using Foot Switches and Expression Pedals” (p. 32)
PATCH BACKUP
Allows you to back up and recover effects.
”Backing Up Effects to SD Cards (PATCH BACKUP)” (p. 36), “Recovering Effects Backed Up on SD Cards
(PATCH RECOVER)” (p. 37)
LCD Allows you to adjust the LCD display's contrast.
FACTORY RESET
Allows you to restore the JS-8 to its original default factory settings.
Press [ENTER]; the parameters
are returned to the selected
factory default settings.
Specify the range
of user effect patches
to be restored to the
original settings.
To restore all parameters to
their default factory settings,
check here.
To restore the system
parameters to their default
factory settings, check here.
Press [ENTER]; the parameters
are returned to the selected
factory default settings.
parameters to their default
factory settings, check here.
To restore the user effect
patches to their default fac-
tory settings, check here.
If VIEW SW is turned ON, an SD CARD item will be added to
the SONG LIST.
By selecting SD CARD in the SONG LIST, you'll be able to
directly view the contents of the SD card from the JS-8's own
screen, just as on your computer.
1. Press [MENU].
2. Select SYSTEM, then press [ENTER].
3. Select SD CARD, then press [ENTER].
4. Select SETTING, then press [ENTER].
VIEW SW Description
OFF
SD CARD will not be shown in the SONG LIST.
(Factory setting)
ON
SD CARD will be shown in the SONG LIST. By
selecting SD CARD in the SONG LIST, you can
view the files that are saved on the SD card.
About the VIEW SW parameter for the SD card