Filter
Top Products
27
Convenient Functions
Deutsch Français Italiano PortuguêsEspañol NederlandsEnglish
COMP parameter list
LIMITER parameter list
Parameter
SUSTAIN
This sets the sustain for the sound.
ATTACK
This sets the attack (onset) of the sound.
LEVEL
This sets the volume level of the effect.
Parameter
THRESHOLD
When the input signal level exceeds the
level set here, limiting will be applied.
RELEASE
Adjusts the amount of time that the limit-
ing effect is applied after the signal exceeds
the threshold level.
LEVEL
This sets the volume level of the effect.
OCTAVE parameter list
Parameter
OCTAVE LEVEL
This sets the volume level of the effect
sound.
DI RECT LEVEL
This sets the volume level of the direct
sound.
AC.PROCESSOR parameter list
Parameter
TYPE
Selects the modeling type.
SMALL
This is the sound of a small-bodied
acoustic guitar.
MEDIUM
This is a standard, unadorned
acoustic guitar sound.
BRIGHT
This is a bright acoustic guitar
sound.
POWER
This is a powerful acoustic guitar
sound.
BASS
Adjusts the low-end volume.
MIDDLE
Adjusts the midrange volume.
TREBLE
Adjusts the high-end volume.
Parameter
TYPE
Selects the number of stages that the phaser
effect uses.
4 STAGE
This is a four-phase effect. A
light phaser effect is ob-
tained.
8 STAGE
This is an eight-phase effect.
This is the most common
phaser effect.
12 STAGE
This is a twelve-phase ef-
fect. A deep phase effect is
obtained.
BI-PH.
This is the phaser with two
phase shift circuits con-
nected in series.
RATE This sets the speed of the effect.
DEPTH
This sets the richness of the effect.
RESONANCE
This sets the intensity of the effect.
PHASER parameter list
FLANGER parameter list
TREMOLO parameter list
Parameter
RATE This sets the speed of the effect.
DEPTH
This sets the richness of the effect.
MANUAL
Adjusts the modulation frequency of the
flanger effect.
RESONANCE
This sets the intensity of the effect.
Parameter
RATE
This sets the speed of the effect.
DEPTH
This sets the richness of the effect.
WAVE SHAPE
Adjusts changes in volume level. A higher
value will steepen wave’s shape.
About the RATE Parameter in PHASER,
FLANGER, and TREMOLO E ect
When set to BPM, the value of the RATE parameter is set
according to the value of the “EFFECT TEMPO” (p. 30) speci-
fied for each patch. This makes it easier to achieve effect
sound settings that match the tempo of the song.