Filter
Top Products
20
Chapter
6
1. Press [EFFECTS].
To Copy an E ect Patch
Call up the effect patch you want to copy, then merely
save that effect patch as it is to the desired effect patch
number.
Switching effects with PATCH SELECT before you save an
edited effect will cause the edited content to be lost.
Advanced Editing of E ect Parameters
Saving E ects
1. After editing the effect, press [MENU].
2. Use the cursor buttons to select WRITE, and then press [ENTER].
Screen 1
Screen 5 (Example: AMP)
Screen 4
Screen 2
Screen 3
Convenient Functions
Press the right
cursor button to
switch to Screen
2, 3.
Select the effect
patch you want
to edit here.
Use the dial to select
the effect category.
Effect
patch
number
Screen 3
Use the cursor
buttons to select
the effect you
want to edit.
Use the dial
to switch the
selected effect
on and off.
(Example) AMP
ON:
OFF:
Pressing
[MENU] enables
various editing
procedures.
Press [ENTER]
to switch to the
settings screen for
the selected effect
(Screen 5).
Press the right
cursor button to
access additional
parameters for the
selected effect.
parameters for the
selected effect.
Press [MENU],
then select WRITE
to save the edit.
then select
to save the edit.
Press [ENTER] to
switch the effect
on and off.
Use the cursor
buttons and
dial to edit the
parameters.
Use the left and
right cursor but-
tons and the dial to
name the effect.
Press [ENTER] to save the
effect to the selected ef-
fect number.
Select the ef-
fect patch number
you want to save
your changes to.
To adjust the sound,
move the cursor's posi-
tion with the cursor
buttons and dial.
Press the right
cursor button to
switch to Screen 4.