Filter
Top Products
2
PUNCH 40DSM PUNCH 60DSM PUNCH 100DSM PUNCH 200DSM
Dimensions 9-5/8" (24.4cm) W 9-5/8" (24.4cm) W 9-5/8" (24.4cm) W 9-5/8" (24.4cm) W
9-5/8" (24.4cm) L 10-5/8" (27.0cm) L 11-5/8" (29.5cm) L 12-5/8" (32.0cm) L
2-5/8" ( 6.6cm) H 2-5/8" ( 6.6cm) H 2-5/8" ( 6.6cm) H 2-5/8" ( 6.6cm) H
Bandwidth 15Hz to 100kHz ±3dB
Damping Factor @ 4Ω At output connector - Over 200
Frequency Response 20Hz to 20kHz ±1.0dB / 10Hz to 100kHz ±3dB
Slew Factor Over 5
IM Distortion (IHF) Less than 0.05%
Input Gain Variable from 40dB to 14dB (250mV - 1 Volt)
25dB 26.8dB 29dB 32dB
The above figures are factory preset and are correct for 500 m
V rated source units.
Protection Internal analog-computer output protection circuitry limits power in case of
overload. Thermal switch shuts down the amplifier in case of overheating.
Battery Fusing Rates 20 Amps 30 Amps 40 Amps 50 Amps
(External to Amplifier)
Fuse Type ATC ATC ATC AGU
Equalization Bass: +18dB Maximum at 45Hz
Treble: +12dB Maximum at 20kHz
Input Impedance ≤ 20k ohms
Specifications subject to change without notice.