Filter
Top Products
1
SPECIFICATIONS
PUNCH 40DSM PUNCH 60DSM PUNCH 100DSM PUNCH 200DSM
Dynamic Power Rating (IHF-202 Standard) - Measured at 14.4 Volts
1
Mono into a 4Ω Load 160 Watts 260 Watts 420 Watts 500 Watts
Per channel into a 2Ω Load 75 Watts 130 Watts 200 Watts 240 Watts
Per channel into a 4Ω Load 40 Watts 80 Watts 110 Watts 150 Watts
Continuous Power Rating (IASCA Standard) - Measured at 11.6 Battery Volts
RMS continuous power per channel,
both channels driven into a 4Ω load 20 Watts 30 Watts 50 Watts 100 Watts
from 20 to 20,000 Hz with less than (@ 11.9
0.05% Total Harmonic Distortion (THD) Battery Volts)
RMS continuous power per channel,
both channels driven into a 2Ω load 40 Watts 60 Watts 100 Watts 200 Watts
from 20 to 20,000 Hz, with less than (@ 11.9
0.1% Total Harmonic Distortion (THD) Battery Volts)
RMS continuous power mono into a
4Ω load from 20 to 20,000 Hz, with 80 Watts 120 Watts 200 Watts 400 Watts
less than 0.1% Total Harmonic (@ 11.9
Distortion (THD) Battery Volts)
Signal-to-Noise Ratio Over 110dB A-weighted
1
See Appendix A - Dynamic Power Measurements for information on these specifications.