Filter
Top Products
BIASIC OPERATION INSTUCTIONS (continued)
Switching Between AM and FM
l
To change from AM to FM (or vice versa) press the SAND button.
Pressing SAND switches the system back and forth between the two recep
tion modes.
Tuning in a Station
l
Press and hold MANUAL/SEEK V or MANUAL/SEEK A for at least one
second and the tuner will scan automatically down or up for a receivable
radio signal. It stops when it reaches a signal that is strong enough for
clear reception.
Press and hold again to resume the search.
l
Press MANUAL/SEEK V or MANUAL/SEEK A to move down or up a
single tuning step. Use this option to search for stations manually or to fine
tune reception of a weak station.
l
Press and hold MANUAL/SEEK V or MANUAUSEEK A to move rapidly
down or up to a desired point in the frequency range. Release when the
desired frequency is reached, and the system stops on the first station with
a strong enough signal for clear reception.
Storing Stations in Memory (Tuner Presets)
The system can store up to 24 different stations - 16 FM and 6 AM - for
easy selection later on.
To store a preset station: Select an AM or FM station usjng the tuning options
explained in the preceding section. Press MEMORY PROS once. The display
flashes the “MEMMY” message, giving you 5 seconds to select a preset
number -
from 1 to 6 for AM’ stations, from 1 to 16 for FM stations.
l
While the “MEMORY” message is flashing, press PRESET V or
PRESET A to reach the preset number that you want to store the station.
l
While the “MEMORY” message is flashing, press MEMORY PROS
again to confirm the selection.
The station is stored, and its preset number is diiayed.
NOTE: Storing a station in memory automatically erases any station previous-
ly stored under the selected preset number.