Filter
Top Products
7
The supplied wiring harness with its 14-
pin connector includes all the lead wires
you need to connect the stereo to
ground, power, some optional compo-
nents, and speakers.
Important:
Do not cut these wires. If
you cut any wire, you cannot obtain a re-
fund or exchange on this product. Ra-
dioShack will provide warranty service if
you cut a wire and find the product is de-
fective.
You might need additional wire to com-
plete the connections, depending on
your individual auto sound system. Your
local RadioShack store carries a full line
of wire and wire management accesso-
ries.
Cautions:
•You
must
connect the GROUND,
+12V TO IGNITION, and +12V TO
BATTERY wires first, then make all other
connections as described in the fol-
lowing sections before you plug the
wiring harness into the stereo. If you
do not make the connections in the
order shown, an incorrect connection
could damage the stereo.
•You must connect a separate wire to
each speaker terminal as described
in “Connecting Two Pairs of Speak-
ers” on Page 9 or “Connecting One
Pair of Speakers” on Page 10. Do
not use a common wire or chassis
ground for any speaker connection.
12-2115a.fm Page 7 Wednesday, January 12, 2000 11:18 AM