Filter
Top Products
17
Notes:
• When you adjust the balance toward
the left speakers (by pressing
–), L
and the left balance level appear
(such as
L5). When you adjust the
balance toward the right speakers
(by pressing
+), R and the right bal-
ance level appear (such as
R3).
• When you adjust the fader toward
the front speakers,
F and the front
fader level appear. When you adjust
the fader toward the rear speakers,
R and the rear fader level appear.
• If
BAS, TRE, BAL, FAD, or VOL and
the number disappear before you
press
+ or –, repeatedly press
AUDIO until the setting you want
reappears, then repeatedly press
+
or – to change the setting.
MUTE — Press to temporarily silence
the stereo.
MUTE appears. To restore
the sound, press
MUTE again.
USING THE AUXILIARY
SOURCE INPUT
If you used the input jacks on the back of
the stereo to connect it to an external
source such as a portable CD player or
stand-alone CD changer/controller sys-
tem, follow these steps to listen to that
external source.
1. With the stereo on, press
MODE
once. CD appears.
2. Turn on the external sound source.
3. Adjust the volume, bass, treble, bal-
ance, and fader settings to suit your
listening preference.
4. Press
MODE again until CD disap-
pears to listen to this stereo’s radio
or tape player.
Line In
Jacks
12-2115a.fm Page 17 Wednesday, January 12, 2000 11:18 AM