Filter
Top Products
16
BASIC OPERATION
SETTING THE CLOCK
Note:
You can set the clock only when the vehicle’s
ignition is turned on or set to ACC.
1. Hold down
F/C (Frequency/Clock) until the hour
digit(s) blink(s), then repeatedly press
+ or – until
the correct hour appears.
2. Press
F/C again. The minute digits blink. Repeat-
edly press
+ or – until the correct minute appears.
3. Press
F/C again to store the time.
ADJUSTING THE CONTROLS
When you listen to your stereo, you can adjust the following controls to suit your lis-
tening preferences.
+
/
–
—
Repeatedly press to increase (+) or decrease (–) the volume. VOL: and the
volume level appear (such as
VOL:12). The volume level ranges from 0 to 40. The
display automatically returns to the time display about 5 seconds after you finish ad-
justing the sound.
Warning:
To protect your hearing, do not listen at high volume levels. Slowly increase
the volume to a comfortable listening level.
AUDIO
— Repeatedly press until BAS, TRE, BAL, FAD, or VOL and the current level
appear, then press
+ or –
within 5 seconds to change the stereo’s bass, treble, bal-
ance, or fader settings.
12-2115a.fm Page 16 Wednesday, January 12, 2000 11:18 AM