Filter
Top Products
19
• To temporarily display the frequency
of the station currently playing,
press
F/C. The display shows the
frequency for about 5 seconds, then
returns to the clock display.
MEMORY TUNING
You can manually store up to 12 AM and
18 FM stations in memory groups. Each
memory group (AM 1, AM 2, FM 1, FM 2,
and FM 3) holds up to six stations. You
can also automatically store stations into
a memory group.
To clear all the previously stored stations
and the clock setting, use the tip of a pen
or a straightened paper clip to press
RE-
SET
.
To store different stations, follow the in-
structions in “Manually Storing Stations”
or “Automatically Storing Stations.” To
set the clock, see “Setting the Clock” on
Page 16.
Manually Storing Stations
1. Repeatedly press BAND to select
the desired memory group (
AM 1 or
AM 2 for AM, or FM 1, FM 2, or
FM 3 for FM).
2. Tune to the station you want to
store.
3. Hold down the desired memory lo-
cation button until the frequency and
CH with the selected button number
appear. The volume momentarily
mutes while the radio stores the sta-
tion.
Automatically Storing Stations
1. Repeatedly press BAND to select
the memory group where you want
to store stations. For example, to
store the first group of AM stations
into AM 1, repeatedly press
BAND
until AM 1 appears.
Memory Location Buttons
12-2115a.fm Page 19 Wednesday, January 12, 2000 11:18 AM