Filter
Top Products
20
2. Hold down AMS (automatic memory
scan) for about 3 seconds. The ste-
reo scans the selected band and
stores the first six stations it finds
(starting with the currently tuned fre-
quency).
The frequency, memory group, and
memory location number appear for
each station as it is stored. Then,
after the stereo scans the band once,
it tunes to the last stored station and
begins to play.
3. To stop the stereo from searching
for stations before it automatically
stops, briefly press
AMS.
Note:
If a station has a weak signal
or interference, the stereo might not
store it automatically. If this hap-
pens, you can manually store the
station.
Selecting a Stored Station
To select a stored station, press BAND to
select the correct memory group. Then
briefly press the desired memory loca-
tion button. (Do not hold down the mem-
ory location button. This erases the
previously stored station and stores the
currently tuned station into that location.)
Scanning Stored Stations
The stereo’s automatic memory scan
(AMS) feature scans all stored stations in
a selected memory group, pausing for 5
seconds at each stored station.
1. Press
BAND until the stereo displays
the memory group you want to scan.
2. To start automatic memory scan,
briefly press
AMS. As each stored
frequency plays, the current mem-
ory location number flashes. (Do not
hold down
AMS. This causes the
radio to automatically seek for and
store six stations into the selected
memory group.)
3. To stop scanning when the stereo
pauses at a station, briefly press
AMS. Otherwise, the stereo contin-
ues to scan the memory group.
12-2115a.fm Page 20 Wednesday, January 12, 2000 11:18 AM