Filter
Top Products
Section 1: Introduction- Physical Characteristics & Layout
FRONT PANEL (numbers correspond to reference locations shown in illustration above)
1- POWER switch
2- Cooling air exhaust vents (intake vents are located on left side of chassis as viewed from the front)
3- POWER on indicator
4- DIAGNOSTIC indicator
5- RCV, XMT and LINK STATUS network status indicators
6- PORT A - PORT H connection indicators
7- Access hole for the BYPASS switch (
this is not labeled on the panel
)
6
PHYSICAL CHARACTERISTICS
The CM16a is one rack space high (1RU) and has an internal, univeral 100-240V AC power supply. The chassis is 37.7 cm (14.84”) deep.
The width of the chassis, less rack ears, is 43.7 cm (17.20”). For detailed mounting dimensions, refer to the Section 4: Specifications-
Dimensions (page
32
). The weight of the CM16a is approximately 5 kilograms (11 pounds).