Filter
Top Products
30
Section 3: Operation- Telnet Access
The RS-232 features can be accessed via the network.
The Microsoft Telnet application is a Windows program. Consult Windows documentation for Telnet information .
This is the basic procedure for opening a Telnet session:
1- To open the Telnet sesion- Click START, select RUN, type Telnet followed by a space, then the IP address of the CM16a you want to
communicate with in the text box and click OK. Win2000 will not use a console window (with menu) but rather a DOS window.
2- If the address entered was correct and network communications with the CM16a are successful, the Telnet session should open.
3- Now you have the same options that are available in the Serial Port I/O (RS-232) interface section (see page 29).