Filter
Top Products
Manual tuner features
07
25
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 7
Manual tuner features
Selecting stations manually
1 Press
TUNER
(
FM/AM
) to switch to the
tuner, then press repeatedly to select the AM
or FM band.
The display shows the band and frequency.
2 Tune to a frequency.
There are three tuning modes—step, auto, and
high-speed:
•
Step tuning
: Press
TUNE +/–
repeatedly
to change the displayed frequency.
•
Auto tuning
: Press and hold
TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the next
station it finds. Repeat to keep searching.
•
High-speed tuning
: Press and hold
TUNE
+/–
until the frequency display starts to
move rapidly. Keep the button held down
until you reach the frequency you want. If
necessary, fine tune the frequency using
the manual tuning method.
Manually saving station presets
In addition to
Automatically saving station
presets
on page 17, you can manually select
which stations you want to add.
1 Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
2 Press
SYSTEM SETUP
(
SHIFT
+
HOME
MENU
), use
/
to choose ‘ST. MEM.’ then
press
ENTER
.
3 Use
/
to select the preset you want
then press
ENTER
.
The station is stored under the preset number
(1–30) you selected.
Improving FM stereo sound
If you’re listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
1 Make sure you’re tuned to an FM station.
2 Press
SYSTEM SETUP
(
SHIFT
+
HOME
MENU
), use
/
to choose FM MODE then
press
ENTER
.
3 Use
/
to select FM MONO then press
ENTER
.
The indicator lights when the tuner is in
mono reception mode.
• Select
FM AUTO
above to switch back to
auto-stereo mode (the indicator lights
when receiving a stereo broadcast).
XV-GX3.book 25 ページ ２００５年７月６日 水曜日 午前１１時４２分