Filter
Top Products
Additional information
12
41
En
English
Français
Deutsch
Nederlands
Italiano
Español
DVD/CD/Video CD player
WMA/MP3/JPEG discs
Problem
Remedy
The disc is ejected automatically after
loading.
• Clean the disc.
• Align the disc properly in the disc guide.
• If the region number on a DVD-video disc does not match the number on
the player, the disc cannot be used (see
DVD Video regions
on page 35).
• Allow time for any condensation inside the player to evaporate. Avoid using
the player near an air-conditioning unit.
Playback is not possible. • Disc may be loaded upside down. Reload the disc with the label side face
up.
Picture playback stops and the
operation buttons cannot be used.
• Press
, then start playback again (
).
• Switch the power off once, then on again using the front panel
STANDBY/ON
button.
Settings are canceled. • When the power is cut due to power failure or by unplugging the power cord
for several days, settings will be canceled.
No picture/No color. • Check that connections are correct and that plugs are inserted fully.
• Check the instruction manual of the TV/monitor to make sure the TV/
monitor settings are incorrect.
Screen is stretched or aspect does not
change.
• The
TV Screen
setting is incorrect. Set the TV Screen option to match the
TV/monitor you're using (see
Video Output settings
on page 29).
When recorded on a VCR or passed
through an AV selector, there is
disturbance in the playback picture.
• Due to the player’s copy protection circuits, connection of this device
through a VCR or an AV selector may prevent recording or cause picture
problems. This is not a malfunction.
Picture disturbance during playback
or dark.
• This player is compatible with Macro-Vision System copy guard. Some discs
include a copy prevention signal, and when this type of disc is played back,
stripes etc., may appear on some sections of the picture depending on the TV.
This is not a malfunction.
• Discs respond differently to particular player functions. This may result in
the screen becoming black for a brief instant or shaking slightly when the
function is executed. These problems are largely due to differences between
discs and disc content and are not malfunctions of this player.
Noticeable difference in DVD and CD
volume.
• DVDs and CDs use different recording methods. This is not a malfunction.
Problem
Remedy
CD-ROM disc is not
recognized by the system.
• Make sure that the CD-ROM was recorded using the ISO 9660 disc format. See
Disc /
content format playback compatibility
on page 34 for other disc compatibility information.
Files don’t show up in the
Disc Navigator/Photo
Browser.
• The files on the disc must be named with the correct file extension: .mp3 for MP3 files;
.wma for WMA files; .jpg for JPEG files (upper or lower-case is OK). See
Disc / content
format playback compatibility
on page 34 for other disc compatibility information.
Can’t play WMA files. • The files were recorded using DRM (digital rights management). This is not a
malfunction.
XV-GX3.book 41 ページ ２００５年７月６日 水曜日 午前１１時４２分