Filter
Top Products
Adjusting the sound
09
27
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 9
Adjusting the sound
Using the Sound menu
There are several optional sound settings you
can make from the sound menu.
1 Press
SOUND MODE
(
SHIFT
+
SFC)
.
2 Use
/
to choose the setting you want
to adjust.
The current setting is shown for each option (in
the order shown in step 3) as you cycle through
the display.
• If selecting an SFC memory (
SFC MEM
)
press
ENTER
to continue to the next step.
3 Use
/
to adjust (or select) the setting.
Make adjustments to the following settings:
4 Repeat steps 2 and 3 for other settings.
• Skip this step if selecting an SFC memory.
5 When you’re done, press
ENTER
to
confirm and leave the Sound menu.
Using the Sound Field Control
Depending on the source you’re listening to,
you may want to use the Sound Field Control to
match the source you’re listening to.
• Press SFC repeatedly to select a mode.
The options are as follows:
•
ACTION
– Good for sound effects.
•
DOME
– Gives a ‘live’ feel to the sound.
•
DRAMA
– Good for enhancing dialogue.
•
KARAOKE
– Reduces the level of vocal
tracks on pre-recorded music.
•
USER 1
/
2
– See
Using the Sound menu
above.
•
SFC OFF
– (
SFC
indicator disappears)
Boosting the bass level
If you want to bring up the low end for certain
kinds of music or sound sources, you can use
the bass boost to do so.
• Press
P.BASS
to switch the bass boost
on (P.BASS 1) or off (P.BASS 0).
Muting the sound
• Press MUTE to switch off the volume.
To switch the sound back on, adjust the
volume or press
MUTE
again.
Setting
What it does
Option(s)
Bass
Adjusts the amount of bass.
–4
to
+4
Treble
Adjusts the amount of treble.
–4
to
+4
Stereo
Wide
Makes the stereo spread
appear wider than it really is
OFF
ON
SFC
Mem-
ory
Stores your current bass,
treble and stereo-wide
settings as a preset.
USER 1
USER 2
XV-GX3.book 27 ページ ２００５年７月６日 水曜日 午前１１時４２分