Filter
Top Products
Getting started04
16
En
Video CD/Super VCD PBC menus
Some Video CD/Super VCDs have menus from
which you can choose what you want to watch.
These are PBC (Playback control) menus.
You can play a PBC Video CD/Super VCD
without having to navigate the PBC menu by
starting playback using a number button to
select a track, rather than the
(play) button.
Playing cassette tapes
This unit has a tape deck that can be used for
both recording and playback. In addition, it
features automatic music search (AMS) and
auto-reverse functions
1
. See
Manual recording
to cassette
on page 24 for more features.
1 Push down on the cassette door where
indicated to open it and insert a tape.
2 Close the cassette door.
3 Press REVERSE MODE (front panel only) to
select the reverse mode.
Press repeatedly to choose between:
• – Single side playback
• – Auto-reverse playback: stops after
finishing playback in the ‘reverse’ (
)
direction
• – Continuous playback (up to 8
complete plays)
4 Press TAPE to start playback.
You can also press
(remote) or
(front
panel) to start playback when
TAPE
is selected.
The side of the tape you’ll hear is whichever is
face up when you load it. This is the ‘forward’
(
) direction, while the other side is ‘reverse’
(
). The direction indicator is shown in the
display.
Basic playback controls
The following table shows the basic controls on
the remote for playing cassette tapes.
Button
What it does
RETURN
Displays the PBC menu.
Numbers
Selects numbered menu options.
Press
ENTER
to select.
Displays the previous menu page
(if there is one).
Displays the next menu page (if
there is one).
Note
1 The auto-reverse feature lets you play or record a tape without physically taking it out and turning it over.
Button What it does
TAPE
(
)
Starts/resumes normal playback. Each
time you press either button during
playback, the other side of the tape
starts playing. Pressing
TAPE
(or
)
when the tape is stopped starts
playback on the side it was playing
previously.
Pauses playback.
Stops playback. Also resets the tape
counter to
0000
if pressed when the
tape is already stopped.
Press to fast-rewind a tape.
Press to fast-forward a tape.
/
a
a.Track search is unlikely to work reliably if:
– the space between tracks is less than about 4 seconds.
– the recording is noisy so the spaces are not recognized.
– the recording contains frequent silences, such as a lan-
guage study tape.
– the recording contains sections of very quiet material,
such as some classical music recordings.
Searches for the previous / next blank
space between tracks on the side
currently playing (in other words, to the
start of the current / next track), then
resumes playback.
By pressing more than once, the tape
will skip several tracks at once (up to a
maximum of 15). For example, press
twice to skip forward two tracks.
XV-GX3.book 16 ページ ２００５年７月６日 水曜日 午前１１時４２分