Filter
Top Products
25
Display of the MCACC parameters
In addition to the reverberation frequency characteristics data measured with the Advanced MCACC
function, all the parameters (results of measurements) set in the MCACC memories can be checked on the
computer.
Parameters that can be displayed
1. Speaker Setting (Speaker system and crossover frequency)
2. Channel Level (Speaker output level)
3. Speaker Distance (Distance to the speaker)
4. Standing Wave Control (Standing wave control filter)
5. Acoustic Cal EQ (Calibration of the listening environment’s frequency characteristics)
a
6. X-Curve (Tonal balance of the speaker system for movie soundtracks)
a. In addition to the EQ calibration values stored in each MCACC memory, the EQ calibration curve name (“Symmetry”,
“All Ch Adjust” or “Front Align”) is also displayed. Furthermore, “Custom” is displayed for memories for which the
equalizer has been adjusted manually. Measurements of the reverb characteristics after calibration (page 24
) are
performed applying the EQ calibration curves for these memories.
Displays of the different memories
It is possible to receive and display the data for all the MCACC memories (MEMORY1 to MEMORY6), but
also possible to display the data for the individual memories.
When there are items that cannot fit on the display, move the scroll bar on the screen to display the
remaining data.
Note