Filter
Top Products
14
Application Operations (Continued)
2 Display item selection tab
A graph for the reverberation frequency characteristics or the MCACC parameter list is displayed. The
“Group Delay” function is not used on this receiver. Nothing is displayed if it is selected.
3 Level [dB]
The level axis.
4 Time [msec]
The time axis.
5 Channel memo (only available when the channels are displayed on the reverb
characteristics graph)
Allows you to record a short memo about each channel.
6 Date and time
Display the date (yyyy.mm.dd) and time when the measurement data was transferred to the PC.
7 Before and After selection buttons
Select “Before” to display the graph of the characteristics before calibration, “After” to display the
characteristics after calibration.
8 Channel and frequency switch buttons
Ch: Selects channel display mode (frequencies are displayed along graph depth axes).
Freq: Selects frequency display mode (channels are displayed along graph depth axes).
9 All/individual display switch menu
Allows you to select All display or individual display (Left, Center, etc.).
10 Graph adjustment bar
Z: Increases or reduces the display unit of the Level [dB] scale.
M: Moves the Level [dB] scale.
E: Moves the viewpoint of 3D graphs vertically. (Cannot be changed for 2D graphs.)
R: Moves the viewpoint of 3D graphs horizontally. (Cannot be changed for 2D graphs.)
Window
Cascade
Cascades files.
a
a. Available when two or more files are open.
Tile
Tiles files.
a
Minimize Minimizes the window.
Arrange
Arranges minimized icons.
a
Help
Glossary Displays definitions of terms related to the MCACC function and this application.
Version Info Displays the version of the application.
Continue