Filter
Top Products
01
01
Controls and displays
8
En
Remote control
As for operating other devices, the remote control codes for
the Pioneer products are preset. The settings cannot be
changed.
1 SLEEP
Press to change the amount of time before the receiver
switches into standby (30 min – 60 min – 90 min – Off). You
can check the remaining sleep time at any time by pressing
SLEEP once.
2
RECEIVER
Switches the receiver between standby and on.
3
Switches the remote to control the receiver (used to select
the white commands above the number buttons
(MIDNIGHT, etc)). Also use this button to set up surround
sound (page 27) or Audio parameters (page 25).
4 INPUT SELECT
Use to select the input source (page 18).
5 Input function buttons
Use to select the input source to this receiver (page 18). This
will enable you to control other Pioneer components with the
remote control.
6 SIGNAL SEL
Press to select the audio input signal of the component
to play back
(page 18).
7 Sound control buttons
Acous.EQ – Cannot use for this unit.
S.RETRIEVER – Press to restore CD quality sound to
compressed audio sources (page 24).
PHASE – Press to switch on/off Phase Control (page24).
8 Listening mode and component control buttons
AUTO/DIRECT – Switches between Auto surround mode
(page 23) and Stream Direct playback (page 24).
STEREO – Press to select stereo playback (page 23).
ALC/STANDARD – Press for standard decoding and to
switch between the modes of 2 Pro Logic II and NEO:6,
and the Auto level control stereo mode (page 23).
ADV SURR – Switches between the various surround
modes (page 23).
ECO –
Switches between ECO Mode 1/ECO Mode 2.
When ECO Mode is turned ON, the display will go
dark
(page 23).
9 Receiver and component control buttons
The following button controls can be accessed after you have
selected the corresponding input function button (BD, DVD,
etc.).
Press first to access:
AUDIO PARAMETER – Use to access the Audio options
(page 25).
HOME MENU – Press to access the Home Menu
(page 27).
RETURN – Confirm and exit the current menu screen.
Press BD, DVD first to access:
TOP MENU – Displays the disc ‘top’ menu of a Blu-ray
Disc/DVD.
HOME MENU – Displays the HOME MENU screen.
RETURN – Confirm and exit the current menu screen.
MENU – Displays the TOOLS menu of Blu-ray Disc player.
Press TUNER first to access:
TOOLS – Memorizes stations for recall, also used to
change the name (page 22).
BAND – Switches between AM, FM ST (stereo) and FM
MONO radio bands (page 21).
Press iPod/USB first to access:
iPod CTRL – Switches between the iPod controls and the
receiver controls (page 20).
10
///
(TUNE
/
, PRESET
/
), ENTER
Use the arrow buttons when setting up your surround sound
system (page 27). Also used to control Blu-ray Disc/DVD
menus/options.
Use TUNE / can be used to find radio frequencies and
PRESET / can be used to select preset radio stations
(page 22).
BD DVD
INPUT SELECT
SOURCESLEEP
TV
CONTROL
DIMMER
CD
INPUT
1
4
7
MIDNIGHT
CH
RECEIVER
TUNER
iPod/USB
SAT/CBL
GAME
TV
SIGNAL SEL
Acous.EQ
PHASE
S.RETRIEVER
ENTER
ADV SURR
ECO
AUTO/
DIRECT
VOL
+
10
2
5
8
SPEAKERS
LEV
LEV
SB CH
DISP
CLR
3
6
9
0
ENTER
CH
CH
CH SELECT
MUTE
RETURN
AUDIO
PARAMETER
TOOLS
MENU
VOLUME
BAND
HOME
MENU
iPod CTRL
PTY
TRE
BASS
TOP
MENU
RECEIVER
T
U
N
E
T
U
N
E
P
R
E
S
E
T
P
R
E
S
E
T
RECEIVER
ALC/
STANDARD
STEREO
1
2
13
14
15
16
17
3
4
6
5
7
8
9
10
12
11
RECEIVER
RECEIVER
VSX-324-K-P_CMXESM.book 8 ページ ２０１３年２月１３日 水曜日 午前９時１７分