Filter
Top Products
02
02
Connecting your equipment
14
En
Connecting a TV and playback components
Connecting using HDMI
If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player, etc.), you
can connect it to this receiver using a commercially available HDMI cable.
• The following connection/setting is required to listen to the sound of the TV over this
receiver.
-
If the TV does not support the HDMI Audio Return Channel function, Connect the receiver
and TV with audio cables (as shown).
-
If the TV supports the HDMI Audio Return Channel function, the sound of the TV is input
to the receiver via the HDMI terminal, so there is no need to connect an audio cable. In
this case, set ARC at HDMI Setup to ON (see The HDMI Setup menu on page30).
Important
• If the receiver is connected to a TV using an HDMI cable, the on-screen display (OSD) will
not be displayed. Be sure to use a standard RCA analog video cable to connect. In this
case, switch the TV input to analog to see the OSD screen (for setup, etc.) on the TV.
• When the ARC function is ON and the receiver is connected to a compatible TV with an
HDMI cable, and you switch the input of the TV to composite, the input of the receiver may
automatically switch to TV. If this happens, switch the receiver’s input back to the original
input, or turn OFF the ARC function (see The HDMI Setup menu on page 30).
Note
• In order to listen to the audio from the TV that is connected to this receiver using an analog
audio cables, set-up for analog audio input is required (see The Input Assign menu on
page 29).
HDMI
VIDEO AUDIO
COAXIAL
SPEAKERS
ANTENNA
OPTICAL
ASSIGNABLEASSIGNABLE
ASSIGNABLE
OUTIN IN
A
(
CD
)
MONITOR
OUT
DVD IN
ANALOG IN
(CD)
SAT/CBL
IN
DVD SAT/CBL GAME BD
(
TV
)
IN
1
1
IN
1
FM UNBAL
75
AM LOOP
FRONT CENTER
SURROUN
D
RLRL
RL
HDMI IN
HDMI OUT HDMI OUT HDMI OUT
RL
DIGITAL AUDIO OUTANALOG AUDIO OUT
OPTICAL
VIDEO IN
Select one
DVD player,
HDD/DVD recorder
Set-top box
Game console
Blu-ray Disc player,
Blu-ray Disc recorder
HDMI/DVI-compatible TV
This connection is
necessary in order to
see the OSD of the
unit on the TV.
HDMI/DVI-compatible components
If the TV does not support
the HDMI Audio Return
Channel function, this
connection is required to
listen to the TV sound
over the receiver.
VSX-324-K-P_CMXESM.book 14 ページ ２０１３年２月１３日 水曜日 午前９時１７分