Filter
Top Products
Connecting up02
10
En
AM loop antenna
Assemble the antenna and connect to the
receiver. Attach (if necessary) and face in the
direction that gives the best reception.
If you want to attach the loop antenna to a wall,
assemble as shown below.
Antenna snap connectors
Twist the exposed wire strands together and
insert into the hole, then snap the connector
shut.
Using external antennas
To improve FM reception
Connect an external FM antenna.
To improve AM reception
Connect a 5 m to 6 m length of vinyl-coated
wire to the AM antenna terminal without
disconnecting the supplied AM loop antenna.
For the best possible reception, suspend
horizontally outdoors.
10 mm
AM
LOOP
FM UNBAL
75
Ω
ANTENNA
J-shaped plug
75 Ω coaxial
cable
AM
LOOP
FM UNBAL
75
Ω
ANTENNA
Outdoor
antenna
Loop antenna
Indoor antenna
(vinyl-coated wire)
5 m to 6 m
SX_316.book Page 10 Tuesday, March 7, 2006 12:01 PM