Filter
Top Products
32
<ARB7192>
Tuner Operations
Automatic and Manual Tuning
The following steps show you how to tune in FM and AM radio broadcasts using the automatic (search) and manual
(step) tuning functions. If you already know the exact frequency of the station you want, see “Direct Tuning” on the
following page.
1
Press FUNCTION repeatedly on the remote or FM/AM on
the front panel to select the tuner. Press TUNER to set
the remote to the tuner operation mode.
The station you were previously tuned to is received automatically.
2
Press TV FUNC.BAND on the remote or FM/AM on the
front panel to select the band (FM or AM).
Each press switches the band: FM j AM
3
Tune in the station.
For Automatic Tuning
Press and hold TV VOL.FREQ.(+/– ) for about one second, then release.
The tuner starts searching the selected band and stops automatically at
the first station it locates. Repeat to locate other stations.
For Manual Tuning
• To change frequencies one step at a time, press TV VOL.FREQ.(+/– )
repeatedly.
• To change frequencies quickly, hold down TV VOL.FREQ.(+/– ) and
release when you reach the frequency you want.
When using the front panel
Press FREQUENCY (+/–) until the frequency you want appears in the
display.
4
Adjust the volume.
MPX Mode
If the TUNED or STEREO indicators do not light when tuning an FM station,
because the station is too far away or the broadcast signal is weak, press
MPX MODE on the front panel to switch to monaural (MONO) reception.
This should improve reception enough for you to enjoy the broadcast.
1
2
3
4
j
2
4
3
MPX MODE
dB
SP
SIGNAL
SELECT
ANALOG
A
dB
SP
SIGNAL
SELECT
ANALOG
A
dB
SP
SIGNAL
SELECT
ANALOG
A
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
RECEIVER
STANDBY/ON
LD
DVD
TUNER MPX
STANDBY/ON
CLASS
DIRECT
.ACCESS
TAPE
TV FUNC.
BAND
CD
SOURCE
SELECT
TEST TONE
EFFECT
SURROUND
DSP MODE
TV VOL.
FREQ.
0
79
5
13
MUTING
MASTER
VOLUME
Î
CD DISC
CHANNEL
STATION
TV
CONTROL
LEVEL
FUNCTION
CHANNEL
SELECT
ATT.
6
2
4
8
MPX
MODE