Filter
Top Products
23
5 Recording Features
En
Recording a programmed selection
You can automate the process of making a mix CD by using the
programming function of the disc changer.
1 Load the CD(s) you want to program
tracks from in to the CD changer.
You can use any of the three disc trays in the changer.
2 Load a CD-R or CD-RW into the
CD-R tray.
If the disc isn't blank, make sure that there is enough space
on the disc for what you want to record (see Switching the
Display on pages 18–19 to check this).
3 Program a playlist of tracks you want
to record.
For detailed instructions on programming a playlist see
Programming a playlist (3-CD changer) on page 36.
4 Press REC MODE.
The display shows PROGRAM REC.
If you want to switch the copying speed, do so here. The
default is 2x speed. See Changing the recording speed on
page 29 to change it.
If you want to adjust the digital recording level, do so here.
The default is 0dB. See Setting the recording level on page
29 to adjust it.
TIME
DISC
1
DISC
2
DISC
3
MARK
7
1
¡
4
¢
ABC DEF
GHI MNOJKL
PQRS TUV WXYZ
REC
THIS
PROGRAM
123
4
56
78
9
10/0 >10
3 - COMPACT DISC MULTI CHANGER
COMPACT DISC DIGITAL RECORDER
◊ÛB¿ˆ˘≤/
COMPACT DISC RECORDER / MULTI-CD CHANGER
Legato Link Conversion
CD TEXT
START
REC THIS
CD=CD-R
REC MODE
AUTO SPACE
OPEN/CLOSE
1
3
2
OPEN/CLOSE
7
0
0
0
7
0
5 If you want to automatically space
the tracks on the recording, press
AUTO SPACE.
Switching on automatic spacing makes sure that there's
four seconds of silence between each recorded track.
6 Press CD=CD-R START (REC THIS).
Recording stops automatically after the playlist has finished.
• If the button is blinking, there’s not enough space on the
disc for what you want to record. Press again to start
recording anyway, or press 7 to cancel.
If the playlist is longer than the recording time available on
the CD-R/CD-RW, recording stops when the end of the disc is
reached.
• If you want to now finalize the disc, turn to page 31.