Filter
Top Products
14
4 Getting Started
En
Quick CD recording
Although the PDR-W839 has many advanced recording features,
duplicating a CD is pretty much a one-touch operation. Before
starting, make sure that the recorder is connected to your amplifer
and that everything is plugged in to a power outlet.
For detailed information on other recording features, see chapters
5, 6, 8, and 9.
1 Press the POWER button to switch
on.
The display lights up.
2 Press OPEN/CLOSE 10 to eject the
3-CD changer disc tray.
Place the CD you want to copy, with the label face up, on to
the disc tray, making sure that it is seated properly in the
disc guide.
Note: Do not use an adapter with 8cm CD-singles. The
disc tray has guides for both 12cm and 8cm discs.
3 Press OPEN/CLOSE 10 to close the
disc tray.
4 Press OPEN/CLOSE 0 to eject the
CD-R disc tray.
Place a blank CD-R or CD-RW disc, with the label/non-
recording side face up, on to the disc tray. Again, make
certain that it is seated correctly in the disc guide.
Be careful when handling CD-R and CD-RW discs not to
leave fingerprints on the recording surface.
5 Press OPEN/CLOSE 0 to close the
disc tray.
The recorder reads the disc to see what you've loaded. After a
few seconds it should tell you that you’ve loaded a
NEW DISC.
6 Press CD=CD-R START (REC THIS).
The recorder automatically copies at double speed, so if
you're listening to the recording as it's being made it will
sound a little strange!
After the CD in the changer has finished playing, the
recorder will finalize the CD-R to make it playable on most
ordinary CD players (for more information on this process,
turn to page 8). This process takes just a few minutes after
the CD has been copied.
Remove the disc from the recorder before switching off.
3 - COMPACT DISC MULTI CHANGER
COMPACT DISC DIGITAL RECORDER
◊ÛB¿ˆ˘≤/
COMPACT DISC RECORDER / MULTI-CD CHANGER
Legato Link Conversion
CD TEXT
REC VOL
START
REC THIS
CD=CD-R
PUSH ENTER
OPEN/CLOSE
1
POWER
—
OFF
_
ON
OPEN/CLOSE
¶
0
0
Setting the headphone level
You can set the headphone level so that the output is relatively
louder or softer.
1 Press MENU/DELETE.
2 Turn the jog dial until H.P. LEVEL
appears in the display, then press to
ENTER.
The display shows the current level: H (high), or L (low).
3 Turn the jog dial (4 and ¢ on
the remote)to change the level.
4 Press the jog dial (ENTER) to confirm
the new level.
Recording tracks during playback
You also have the option of choosing to record the track that’s
currently playing in the changer. Make sure there is a CD-R or CD-
RW in the recorder, then simply press CD=CD-R START (REC
THIS
) while the track is playing, and the CD changer will jump to
the beginning of the track and the CD-R starts recording. The
recorder stops automatically at the end of the track.
TIME
ENTER
MENU/
DELETE
4
¢
REC
THIS