Filter
Top Products
35
8 Recording Other Sources
Recording blank sections
This feature is useful when you want to put some space at the end
of a recording session so that the next recording doesn't start after
the last too closely, but use it wherever you need some blank space
recorded on the disc. Note that you can’t start a recording with a
muted section; only after the recording has started, or at the end of
a recording.
1 While recording, or in record-pause
mode, press ¶.
The REC indicator starts blinking and a blank space of
about four seconds is recorded. The recorder then goes into
record-pause. If you start recording again, a new track is
started.
• If you press and hold ¶,you can record a blank for as long
as you hold down the button.
• Pressing ¶, (without holding) in record-pause mode
records four seconds of silence from the current position.
Use this to create spaces between tracks when recording in
1-track synchro mode, for example.
2 To finish the recording session here,
press 7.
• To restart recording, press 6.
Recording fades
When recording a radio or satellite broadcast, or just an excerpt
from a recorded piece of music, you may want to fade in the
recording at the start, then fade out again to finish.
Note: fade in recording is only possible in the manual recording
mode (see page 35). Fade outs are possible in any of the synchro
recording modes (see pages 33–34) or the manual recording mode.
With the source playing, press FADER
in record-pause mode to fade in.
Recording starts with a gradual fade in.
Press FADER during recording to fade
out.
After recording the fade out, the recorder goes into record-
pause. To finish the recording session here, press 7.
If you record a fade out during all-track synchro recording,
the synchro mode is cancelled after the fade out.
Recording blank sections
Recording fades
REC/
REC MUTE
¶
3
- COMPACT DISC MULTI CHANGER
67
COMPACT DISC DIGITAL RECORDER
◊ÛB¿ˆ≥≤/
COMPACT DISC RECORDER / MULTI-CD CHANGER
CD-R CONTROL
COMPACT DISC RECORDER/
MULTI-CD CHANGER
FADER
REMOTE CONTROL UNIT
Î
&