Filter
Top Products
13
4 Getting Started
Quick CD copying
Although the PDR-W739 has many advanced recording features,
duplicating a CD is pretty much a one-touch operation. Before
starting, make sure that the recorder is connected to your amplifer
and that everything is plugged in to a power outlet.
For detailed information on other recording features, see chapters
5, 6, 8, and 9.
1 Press the POWER button to switch
on.
The display lights up.
2 Press OPEN/CLOSE 10 to eject the
3-CD changer disc tray.
Place the CD you want to copy, with the label face up, on to
the disc tray, making sure that it is seated properly in the
disc guide.
Note: Do not use an adapter with 8cm CD-singles. The
disc tray has guides for both 12cm and 8cm discs.
3 Press OPEN/CLOSE 10 to close the
disc tray.
4 Press OPEN/CLOSE 0 to eject the
CD-R disc tray.
Place a blank CD-R or CD-RW disc, with the label/non-
recording side face up, on to the disc tray. Again, make
certain that it is seated correctly in the disc guide.
Be careful when handling CD-R and CD-RW discs not to
leave fingerprints on the recording surface.
5 Press OPEN/CLOSE 0 to close the
disc tray.
The recorder reads the disc to see what you've loaded. After a
few seconds it should tell you that you’ve loaded a
NEW DISC.
6 Press COPY START CD=CD-R.
The recorder automatically copies at double speed, so if
you're listening to the recording as it's being made it will
sound a little strange!
After the CD in the changer has finished playing, the
recorder will finalize the CD-R to make it playable on most
ordinary CD players (for more information on this process,
turn to page 8). This process takes just a few minutes after
the CD has been copied.
Remove the disc from the recorder before switching off.
COPY START
CD=CD-R
OPEN/CLOSE
1
POWER
—
OFF
_
ON
OPEN/CLOSE
3 - COMPACT DISC MULTI CHANGER
0
COMPACT DISC DIGITAL RECORDER
0
◊ÛB¿ˆ≥≤/
COMPACT DISC RECORDER / MULTI-CD CHANGER