Filter
Top Products
22
6 Finalizing and Erasing
3
- COMPACT DISC MULTI CHANGER
67
COMPACT DISC DIGITAL RECORDER
◊ÛB¿ˆ≥≤/
COMPACT DISC RECORDER / MULTI-CD CHANGER
CD-R CONTROL
ERASE
4 1
¡ ¢
When a finalized disc is loaded:
1 Press ERASE.
2 Press 41 or ¡¢ to change
the erase option.
Switch between:
• Erase the TOC (‘de-finalize’ the disc so that further
recording is possible)
ERASE
DISC
DISC
DISC
ALL
FADER
OVER
ANA
CD-RW
FINALIZE
1
2
3
X2
L
R
–dB
8
40
18 6 0
• Erase all tracks
ERASE
DISC
DISC
DISC
ALL
FADER
OVER
ANA
CD-RW
1
2
3
X1
L
R
–dB
8
40
18 6 0
• Press 7 to cancel erase here.
3 Press 6 (CD-R side).
The display shows the time remaining to completion.
• You can halt this erase process by holding down the 7
button for 10 seconds. Make sure, however, that you erase
the disc completely at a later date since you can’t use a
partially erased disc.
Re-initializing a disc
1 Press and hold ERASE for about four
seconds.
The display indicates all disc erase mode. After a short time,
the unit goes into erase standby mode:
ERASE
DISC
DISC
DISC
ALL
FADER
OVER
ANA
MIN SEC
CD-RW
FINALIZE
1
2
3
X2
L
R
–dB
8
40
18 6 0
• Press 7 to cancel all disc erase here.
2 Press 6 (CD-R side).
The process takes about half the length of the disc. The
display shows the time left to completion.
• You can halt this erase process by holding down the 7
button for 10 seconds. Make sure, however, that you erase
the disc completely at a later date since you can’t use a
partially erased disc.