Filter
Top Products
49
Advanced Operations (Operations Using Memory Cards)
If thumbnail images
are not recorded, the
memory point time
data for the cue points
or loop points will be
displayed instead.
Point information is
also shown on the
main unit’s display,
allowing you to select
points even without a
preview monitor.
2. Use the cursor button ( / / / ) to select the desired
thumbnail image, and press the ENTER button.
While reading data from a memory
card, the main unit’s display will
show the “CUE Readin” or “LOOP
Readin” message.
¶ The cue point or loop point will be read into the player, and the
memory point time will be displayed; the player will search for the
cue point and enter cue standby there.
CUE
CBA
■ To read a cue/loop point into a hot cue
1. Press the CUE/LOOP CALL button.
¶ The preview monitor screen will display the cue point navigation
menu.
1–001 0.11.05CUE
ENTER
CALL
CBA
While the call screen is displayed, point
information is also shown on the play-
er’s display.
2. Use the cursor button to select the desired thumbnail im-
age, and press the HOT CUE REC MODE button so that
the HOT CUE A, B, and C button indicators light red. Then
press the button (A, B, or C) into which you wish to store
the hot cue point.
While reading data from the memory
card, the main unit’s display will show
the “HOT * Readin” message.
¶ Playback will begin when data reading is completed.
CUE
CBA
¶ When playing a copy-protected disc, thumbnail image of set point
data cannot be recorded to the memory card.
1–001
0.23
1–002
0.04
1–003
0.05
1–004
0.02
1–004
0.07
1–006
0.00
1–006
0.06
1–006
0.12
1–006
0.20
1–006
0.28
1–006
0.45
1–006
1.11
1–006 0.06.00CUE
ENTER
CALL
CBA
¶ Cue point navigation screen when CD is loaded.
TRK–01
0.35
TRK–01
0.39
TRK–01
3.57
TRK–03
0.11
TRK–01 0.39.60CUE
ENTER
CALL
CBA
¶ Cue point navigation screen displays during MP3 playback are as fol-
lows.
–
–
NTER
C
ALL
01
–
001
0
.
03
01
–
008
0
.
06
01
–
004
0
.1
1
01
–
003
0
.
01
■ To recall recorded hot cue points
Hot cue points A, B, and C are automatically recorded on the memory
card. If points have been previously recorded for a disc, when that disc is
inserted the HOT CUE buttons A, B, and C will begin flashing green or
orange. To call one of the recorded hot cue points, press the correspond-
ing button A, B, or C. The flashing green or orange button will change to
light steadily (sound will not begin instantly when a point is called up). If
you have no need of calling one of the hot cue points, press the HOT
CUE REC MODE button. The indicators will change to red, and the hot
cue setting mode will be enabled. (To subsequently call up one of the
hot cue points previously recorded on the memory card, remove the
disc or memory card and reinsert it so that the A, B, and C buttons flash
once again. Then press the desired flashing button).
■ WAVE display
When playing a track with which you have previously used the WAVE
display function, the recorded WAVE pattern will automatically be re-
called and displayed.
Point information is
also shown on the
main unit’s display,
allowing you to select
points even without a
preview monitor.