Filter
Top Products
2 Registration
To register your temporarily connected phone,
refer to Registering connected cellular phone
on page 35.
3 Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is memorized in this unit as the default
setting.
# Caller’s voice volume and ring volume may
vary depending on the type of cellular phones.
# If the difference between the ring volume and
caller’s voice volume is big, overall volume level
may become unstable.
# Before disconnecting cellular phone from this
unit, make sure to adjust the volume to proper
level. If the volume has been muted (zero level)
on your cellular phone, the volume level of your
cellular phone remains muted even after the cel-
lular phone is disconnected from this unit.
Making a phone call
Dial a number
The most basic way to make a call is to simply
dial the number.
Refer to Making a call by entering phone num-
ber on page 41 for detailed instructions.
Calling a number in the Phone Book
or the Call History
Refer to Calling a number in the Phone Book
on page 38 and Calling a number from the Call
History on page 41 for detailed instructions.
Preset number
Numbers that you dial frequently can be as-
signed to presets for quick recall.
Refer to Assigning preset numbers on page 41
for how to assign a number to a preset.
1 Push MULTI-CONTROL up or down to
select a preset number.
# You can also press one of 0 to 9 on the remote
control to select a preset number.
# Preset number 10 is assigned to 0.
# If the number is already in the Phone Book
then the name is also displayed.
# No data is displayed for preset numbers that
have not been assigned.
2 Press MULTI-CONTROL to make a call.
Voice recognition
If your cellular phone features voice recogni-
tion technology, you can make a call by voice
commands.
! Operation varies depending on the type of
your cellular phone. Refer to the instruction
manual that came with your cellular phone
for detailed instructions.
! This function can be operated only when
the connection is established with HFP
(Hands Free Profile).
1 Press BAND and hold until Voice dial
appears in the display.
When Voice dial ON is displayed, voice recog-
nition function is now ready.
# If your cellular phone does not feature voice
recognition function, No voice dial appears in
the display and opearation is not available.
2 Pronounce the name of your contact.
Taking a phone call
Answering an incoming call
Even when a source other than TEL is selected
or when this unit is turned off, you can still an-
swer incoming calls. If you set this unit to
automatically answering incoming calls, refer
to Setting the automatic answering on page 42.
1 When a call comes in, press
MULTI-CONTROL.
# You can also take a phone call by pressing
OFF HOOK on the remote control.
# If the private mode is selected on the cellular
phone, hands-free phoning may not be per-
formed.
Operating this unit
En
32
Section
02