Pioneer DEH-P85BT CD Player User Manual


 
Displaying BD (Bluetooth
Device) address
1 Use MULTI-CONTROL to select
Device info. in the function menu.
The device name (e.g., Pioneer BT unit) of this
unit appears in the display.
# You can edit the device name. Refer to Editing
device name on page 52.
2 Push MULTI-CONTROL left to switch to
the BD address.
12-digit hexadecimal string is displayed.
# Pushing MULTI-CONTROL right returns to the
device name.
Bluetooth Telephone
Basic Operations
If your cellular phone features Bluetooth wire-
less technology, you can connect to this unit
for hands-free, wireless calls, even while driving.
Important
! Since this unit is on standby to connect with
your cellular phones via Bluetooth wireless
technology, using this unit without running
the engine can result in battery drainage.
! Advanced operations that require your atten-
tion such as dialing numbers on the monitor,
using phone book, etc., are prohibited while
you are driving. When you need to use these
advanced operations, stop your vehicle in a
safe place and operate.
! When phone is selected as a source, no audio
adjustments, except balance adjustment, are
possible. The front/rear speaker balance is set
to F15by default for the phone source.
These are the basic operations to use hands-
free phoning via Bluetooth wireless technol-
ogy. More advanced hands-free phoning op-
erations are explained starting on Intro duction
of advanced operations on page 33.
1 Device name
Shows the device name of the cellular phone.
2 Signal level indicator
Shows the signal strength of cellular phone.
! Signal level indicator may differ from
the actual signal level.
! If the signal level is not available, this in-
dicator is not displayed.
3 User number indicator
Operating this unit
En
30
Section
02