Filter
Top Products
Additional information12
68
En
HDMI
XM radio messages
The SR cable is connected, but
the connected components
can’t be operated with the
remote.
• Reinsert the SR cable, making sure it’s connected to the right jack (see Using this
receiver with a Pioneer plasma display on page 60).
• Make sure an analog connection has been made between the units.
• This feature only works with Pioneer products.
The display is dark or off. • Press DIMMER on the control repeatedly to return to the default.
Problem Remedy
Symptom Remedy
No picture or sound.
• If the problem still persists when connecting your HDMI component directly to your
monitor, please consult the component or monitor manual or contact the
manufacturer for support.
No picture.
• Depending in the output settings of the source component, it may be outputting a
video format that can’t be displayed. Change the output settings of the source, or
connect using the component, S-video or composite jacks.
OSD does not appear.
• The OSD will not appear if you have connected using the HDMI output to your TV.
Use component, S-video, or composite connections when setting up the system.
No sound, or sound suddenly
ceases.
• Since the HDMI audio signal is sent through this receiver to your TV, you need to
make separate connections for audio if you want to hear your HDMI component
through this system. See
Connecting using HDMI
on page 57 for more on this.
• If you’ve made separate connections for audio, make sure you have assigned the
analog/digital jack(s) to the corresponding HDMI input for the component. See
Assigning the HDMI inputs
on page 63 to do this.
• Check the audio output settings of the source component.
Symptom Cause Action
Check Antenna The XM antenna is not connected. Check that the XM antenna cable is attached
securely.
XM ANT ERR A short-circuit occurring in the antenna or
surrounding antenna cable.
Make sure that there is nothing unusual with the
antenna or antenna cable. Switch the power off
then back on again.
Updating The radio is being updated with the latest
encryption code.
Wait until the encryption code has been updated.
Channels 00 and 01 should function normally.
No Signal The XM signal is too weak at the current location. n/a
Loading The receiver is acquiring audio or program
information.
Wait until the information has been received.
Off Air The channel currently selected has stopped
broadcasting.
Select another channel.
CH– – – You have selected a channel that does not exist,
or that you have not subscribed to.
The receiver will automatically switch to channel
001 (or the last selected channel).
– – – – – – – – There is no artist name/feature, song/program
title, or channel category associated with the
channel at this time.
No action needed.
VSX_917.book.fm Page 68 Thursday, December 7, 2006 4:40 PM