Filter
Top Products
Controlling the rest of your system09
50
En
Controls for TVs
This remote control can control components after entering the proper codes or teaching the
receiver the commands (see Controlling the rest of your system on page 47 for more on this). Use
the MULTI CONTROL buttons to select the component
•The TV CONTROL buttons on the remote control are dedicated to control the TV assigned to
the TV CTRL button. If you have two TVs, assign the main TV to the TV CTRL button.
Button(s) Function Components
TV Switches the DTV on or off. DTV
Switches the TV or CATV between standby and on. Cable TV/Satellite TV/TV
INPUT
SELECT
Switches the TV input. (Not possible with all models.) TV
TV CH +/– Selects channels. Cable TV/Satellite TV/TV/
DTV
TV VOL +/– Adjust the TV volume. Cable TV/Satellite TV/TV/
DTV
SOURCE Press to switch the component assigned to the TV CTRL
button on or off.
Cable TV/Satellite TV/TV/
DTV
Switches the DTV on or off. DTV
Press to get information on DTV programs. DTV
Use to choose the BLUE commands on a DTV menu. DTV
Use to choose the YELLOW commands on a DTV menu. DTV
Use to choose the GREEN commands on a DTV menu. DTV
Use to choose the RED commands on a DTV menu. DTV
AUDIO Use to switch DTV audio tracks. DTV
DTV MENU Press to display the DTV menu. DTV
GUIDE Use as the GUIDE button for navigating. Cable TV/Satellite TV/TV/
DTV
RETURN Use to select closed captioning with DTV. DTV
Number
Buttons
Use to select a specific TV channel. Cable TV/Satellite TV/TV/
DTV
+10 button Use to add a decimal points when selecting TV channels. DTV
ENTER/
DISC
Use to enter a channel. Cable TV/Satellite TV/TV/
DTV
VSX_917.book.fm Page 50 Thursday, December 7, 2006 4:40 PM