Filter
Top Products
Controls and displays04
26
En
MENU – Displays the disc menu of DVD-
Video discs. It also displays TV and DTV
menus.
T.EDIT – Press to memorize and name a
station for recall (page 44).
SETUP (Press RECEIVER first to access)
Use to access the System Setup menu (see
page 35).
CATEGORY – Press to browse digital radio
broadcasts.
GUIDE – Displays the guides on a digital
TV.
RETURN – Press to confirm and exit the
current menu (also use to return to the
previous menu with DVDs or to select
closed captioning with DTV).
5
(TUNE/ST +/–) /
ENTER
Use the arrow buttons when setting up your
surround sound system (see page 35). Also
used to control DVD menus/options and for
deck 1 of a double cassette deck player. Use
the TUNE / buttons to find radio
frequencies and use ST / to find preset
stations (page 44).
6 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the TV CTRL button. Thus if you
only have one TV to hook up to this system
assign it to the TV CTRL MULTI CONTROL
button. If you have two TVs, assign the main TV
to the TV CTRL button (see page 47 for more on
this).
TV – Use to turn on/off the TV power.
TV VOL +/– – Use to adjust the TV volume.
INPUT SELECT – Use to select the TV input
signal.
TV CH +/– – Use to select channels.
7 Component control buttons
The main buttons (, , etc.) are used to
control a component after you have selected it
using the MULTI CONTROL buttons.
The controls above these buttons can be
accessed after you have selected the
corresponding MULTI CONTROL button (for
example DVD, DVR or TV (when connected to
a DTV)).
DTV ON/OFF – Switches a digital TV on/off.
DTV INFO – Use to bring up information
screens on a digital TV.
MPX – Switches between stereo and mono
reception of FM broadcasts. If the signal is
weak then switching to mono will improve
the sound quality (page 44).
AUDIO – Changes the audio language or
channel on DVD discs.
DISP – Switches between named station
presets and radio frequencies (page 45).
SUBTITLE – Displays/changes the subtitles
included in multilingual DVD-Video discs.
CH +/– – Use to select channels when
using a TV, VCR, DVR, etc.
The following DVR controls can be accessed by
pressing SHIFT:
REC – Starts recording.
REC STOP – Stops recording.
JUKEBOX – Switches to the Jukebox
feature.
HDD/DVD – These buttons switch between
the hard disk and DVD controls for DVD/
HDD recorders.
8 RECEIVER CONTROL buttons
AUTO SURR – Selects Auto Surround
(Auto playback on page 28) or Stream
Direct playback (page 30). Also when
listening to XM Radio, AUTO SURR selects
XM HD Surround feature (page 54).
STEREO
/F.S.SURR
– Switches between
stereo playback and Front Stage Surround
Advance modes (page 30).
STANDARD – Press for Standard decoding
and to switch between the various Pro
Logic IIx and Neo:6 options (page 28).
ADV.SURR. – Use to switch between the
various surround modes (page 29).
VSX_917.book.fm Page 26 Thursday, December 7, 2006 4:40 PM