Filter
Top Products
Connecting up 03
21
En
English
Français
Deutsch
Nederlands
Italiano
Español
Overhead view of speaker setup
You can also refer to the 3-D speaker setup
illustration on page 7.
.
The diagrams below show suggested surround
and surround back speaker orientation. The
first diagram (fig. A) shows orientation with one
surround back speaker (or none) connected.
The second (fig. B) shows orientation with two
surround back speakers connected.
3-D view of
7.1 channel
speaker setup
AC outlet
Power supplied through this outlet is turned
on and off by the receiver's power switch. Total
electrical power consumption of connected
equipment should not exceed 100 W (0.8 A).
• This unit should be disconnected by
removing the power plug from the wall
socket when not in regular use (ex. when
on vacation).
Caution
• Do not connect a TV set, monitor, heater, or
similar appliance to this unit's AC outlet.
• Do not connect appliances with high
power consumption to the AC outlet in
order to avoid overheating and fire risk.
This can also cause the receiver to
malfunction.
• Since a subwoofer or power amplifier can
exceed the 100 W maximum when playing
sources at a high volume, this type of
equipment should not be connected to the
AC outlet.
Surround
left
Surround
right
Listening position
Front
left
Front
rightCenter
Subwoofer
Surround back Surround back
Single surround back speaker
left right
90~120
fig. A fig. B
LS
LS
RS
RS
SB
LS
RS
0~60
SBL
SBL
SBR
SBR
AC OUTLET
AC 120 V 60 Hz
SWITCHED 100 W MAX
0.8 A MAX
VSX_917.book.fm Page 21 Thursday, December 7, 2006 4:40 PM