Phoenix Gold IAMP-GM1 Stereo Amplifier User Manual


  Open as PDF
of 13
 
Phoenix Gold iSeries
www.PHOENIXGOLD.com
11
Troubleshooting
Step 4 - Route all harnesses and power wires in the channel of the iSeries subwoofer enclosure
and mount the iSeries amplier to the enclosure using the (4) supplied screws.
CONGRATULATIONS!
Your sound system upgrade is complete and you are ready to enjoy!
Please refer to your iSeries owners manual for proper operation.
Symptom Solution
No Power Check in-line fuse
Check both power and ground connections
Check that all harnesses are properly plugged it
No Sound Make sure that the vehicle does not have a factory amplier.
If the vehicle has a factory amplier refer to step 4 of the
“Accessing the Battery & Factory Amplier” section.
No Sound from Subwoofer Remove subwoofer from enclosure and make sure all
connections are good.
 previous