Filter
Top Products
9397 750 13928 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data Rev. 03 – 23 August 2004 17 of 31
Philips Semiconductors
PNX2000
Audio video input processor
9. Limiting values
Permanent damage may occur if absolute maximum ratings are exceeded. Prolonged
operation at maximum rating may significantly reduce the reliability of the product.
[1] Not to exceed 4.6 V.
[2] Including voltage on outputs in 3-state mode.
[3] Only valid when the V
DD(I/O)
supply voltage is present.
[4] Valid for : −(0.5 × V
DD
) < V < +(1.5 × V
DD
); T
j
< 125 °C.
[5] Human Body Model, I
leak
< 1 mA.
[6] Machine Model 0.5 mH, I
leak
< 1 mA.
[7] This product includes circuits specifically designed for the protection of its internal devices from the damaging effects of excessive static
charge. However, it is suggested that conventional precautions be taken to avoid applying voltages greater than the rated maximum.
10. Characteristics
10.1 Static characteristics
Table 19: Absolute maximum ratings
Ratings are valid only within operating temperature range unless otherwise specified. All voltages are with respect to V
SS
unless otherwise stated.
Symbol Parameter Min Max Unit
V
DD(core)
supply voltage −0.5 +2.5 V
V
DD(I/O)
supply voltage −0.5 +4.6 V
V
I
DC input voltage (
[1]
[2]
and
[3]
) −0.5 V
DD(I/O)
+ 0.5 V
V
I
DC input voltage 5V tolerant I/O pins (
[2]
and
[3]
) −0.5 +6 V
I
latchup
latch-up current (
[4]
)100-mA
V
esd
electrostatic discharge voltage HBM (
[5]
and
[7]
)-±2kV
V
esd
electrostatic discharge voltage MM (
[6]
and
[7]
)-±200 V
T
stg
storage temperature −40 +125 °C
Table 20: Static characteristics: power supply pins
T
amb
= 0 °C to +70 °C to commercial unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
1.8V Power Supply Pins: V
DDI
, V
DDM
, V
DDD(I2D)
, V
DDA(I2D)
, V
DDA(PLL)
, V
DDA(XTAL)
, V
DDD(ADAC)
, V
DDD(DTC)
V
DD(core)
supply voltage, 1.8 V supplies - 1.65 1.8 1.95 V
I
DD(core)
supply current, 1.8 V supplies V
DD(core)
= 1.8 V - 250 - mA
3.3V Power Supply Pins: V
DDE
, V
DD3(DTC)
, V
DDA(ADAC)
V
DD(3V3)
supply voltage, 3.3 V supplies - 3.0 3.3 3.6 V
I
DD(3V3)
supply current, 3.3 V supplies V
DD(core)
= 3.3 V - 50 - mA