Filter
Top Products
23
English
3139 116 19161
• To exit without storing the setting, press
STOP.
• At the preset time, the timer will be
activated.
™ The selected source will be played.
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
– If the source selected is TUNER, the last
tuned frequency will be switched on.
– If the source selected is CD, playback
will begin with the first track of the last
selected disc. If the CD trays are empty,
the TUNER will be selected instead.
– If the source selected is TAPE, and if the
preset time is reached during high
speed dubbing, the TUNER will be
selected instead.
– If the recording is active, the timer will
be cancelled.
TIMER SLEEP
Sleep
(only on remote control)
This feature allows you to select a length
of time after which the system will switch
to the standby mode automatically.
• Press SLEEP on the remote control
repeatedly to select a period of time.
™ The selections are as follows (time in
minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™
60 …
™ “SLEEP XX” or “OFF” will be
displayed. "XX" is the time in
minutes.
• When you reach the desired length of
time, stop pressing the SLEEP button.
™ After this amount of time passes, the
system will switch to the standby
mode.
To switch off the sleep timer
• Press SLEEP repeatedly until "OFF" is
displayed, or press the STANDBY•ON
button.
To switch off the TIMER
1 Press CLOCK/TIMER for more than 2
seconds
(or TIMER on the remote
control)
.
2 Press STOP on the system to cancel the
timer.
™ The timer is now switched off.
™ The display will show "OFF" and the
TIMER flag disappears.
To start the TIMER again
(for the same
preset time and source)
1 Press CLOCK/TIMER for more than 2
seconds
(or TIMER on the remote
control)
.
2 Press CLOCK/TIMER again to store the
start time.
™ The timer is now switched on.
™ The TIMER flag appears on the display.