18
English
3139 116 19161
TAPE
Auto Reverse Playback
(only on
tape deck 2)
• Press A. REV to select the different
playback modes.
åå
åå
å ....... to record or playback on one
side of the tape. The tape stops
at the end of one side.
˙ ...... to record or playback on both
sides of the tape. The tape then
stops.
∫∫
∫∫
∫ .... to playback continuously on
both sides of the tape up to a
maximum of 10 times per side
unless you press STOP.
Rewind/Fast Forward
When playback is stopped
1 You can rewind or fast forward the tape
by pressing S or T
(or
à
/
á
on the remote control)
respectively.
™ "TA 1 XXX" or "TA 2 XXX"
will be displayed depending on which
button is pressed.
™ The tape will stop automatically at
the end of the rewinding or fast
forwarding.
2 Press STOP to stop rewinding or fast
forwarding.
Loading a tape
• Press on the tape deck to open the tape
deck door.
• Load the tape with the open side
downward and the full spool to the left.
• Close the tape deck door.
BACK
REC/CD SYN
PROG/A. REV
FLAT
PRESET
STOP
LOUDNESS
INCREDIBLE
SURROUND
TREBLEBASS
DOLBY B NR
CLOCK/
TIMER
3 CDC
TAPE
CDR/AUX
TUNER
DIGITAL STEREO HIFI SYSTEM
DUBBING
NORMAL•FAST
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz
SOUND VOLUME
PRESET AM LWTRACK REPEAT MW FM STEREO PROGRAM TIMER SHUFFLE
SURROUND
INCREDIBLE
FLAT
LOUDNESS
CD CHANGER
T.A.
NEWS
SLEEP
DIM
REC
FRONT
HSD
D. DISPLAY
PLAY
DIGITAL CONTROL
SEARCH/TUNE
PRESET
▲
▲
/
A•B
Tape Playback
1 Press TAPE to select TAPE mode.
™ “TAPE 1” or “TAPE 2” will be
displayed.
• Press TAPE again to select either tape
deck 1 or tape deck 2.
2 Load the tape into the desired tape
deck.
3 Press PLAYÉ to start playback.
3a(For Tape Deck 2 only)
Press A•B (SIDE) to switch playback
between side A and B.
™ The BACK or FRONT flag appears on the
display, depending on the side
selected.
3b(For Tape Deck 2 only)
Press A. REV to select the different type
of playback mode
(see auto reverse
playback)
.
4 Press STOP to end playback.
Note:
– To change side before playback begins,
use the SIDE button on the remote
control.