Filter
Top Products
16
English
3139 116 19161
TUNER
Storing Preset Stations
You can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.
Automatic programming
1 Press TUNER.
2 Press PROGRAM for more than one
second.
™ The PROGRAM flag starts flashing and
“AUTO” will be displayed.
™ The system will search for every
available station in the FM waveband
first, then search by the MW and LW
wavebands.
™ All available radio stations will be
stored automatically. The frequency
and preset number will be displayed
briefly.
™ The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.
™ The system will remain tuned to the
last stored preset radio station.
Notes:
– You can cancel the automatic
programming by pressing PROGRAM or
STOP (on the system only).
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming: only
the preset numbers 10 to 40 will be
programmed.
Manual programming
1 Press TUNER.
2 Press TUNER again to select the
desired waveband : FM, MW or LW.
3 Press PROGRAM for less than one
second.
™ The PROGRAM flag starts flashing.
™ The next available preset number will
be displayed for selection.
4 Press TUNE S or T
(or
à
/
á
on the remote control)
to tune to the
desired frequency.
• If you wish to store the radio station to
another preset number, first select
PRESET mode, then press PRESET 4
or 3 to select the desired preset
number.
™ The PRESET flag will be displayed.
5 Press PROGRAM again.
™ The PROGRAM flag disappears and the
radio station will be stored.
• Repeat the
steps 3 to 5
to store other
preset radio stations.
Notes:
– When 40 radio stations are stored and
you attempt to store another radio
station, the display will show"
FULL
”.
If you want to change an existing preset
number, repeat steps 3 – 5.
– You can cancel manual programming by
pressing STOP (on the system only).
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
– When in programming mode, the
PRESET mode will automatically be
activated.
Tuning to Preset Radio
Stations
1 Press PRESET to switch on the PRESET
mode.
™ The PRESET flag will be displayed.
2 Press PRESET 4 or 3
(or
í
/
ë
on
the remote control)
to select the desired
preset number.
™ The preset number, radio frequency,
and waveband appear on the display.
Receiving RDS Radio Station
Ç
RDS (Radio Data System) is a broadcasting
service that allows FM stations to send
additional information along with the
regular FM radio signal. This additional
information can contain:
• STATION NAME: The radio station
name is displayed.
• PROGRAM TYPE: The following
program types exist and can be received
by your tuner: News, Affairs, Info, Sport,
Educate, Drama, Culture, Science,
Varied, Pop M, Rock M, M.O.R. (middle
of the road music), Light M, Classics,
Other M, No type.
• RADIO TEXT (RT): text messages
appear in the display.
When you have tuned to a RDS station, the
RDS logo (Ç) and the radio station name
will appear on the display:
• The display normally shows the radio
station name if available.
By repeatedly pressing RDS button you
can change the type of display
information:
™ The display shows in turn:
STATION NAME ™
PROGRAM TYPE ™ RADIO
TEXT ™ STATION NAME ...