Philips FW-D1 Stereo System User Manual


 
3139 115 20054
9
English
PREPARATION
F Subwoofer Out Connection
Connect the optional active subwoofer to
the SUBWOOFER OUT terminal. The
subwoofer reproduces just the low bass
sound effect (e.g. explosions, the rumble of
spaceships, etc.). Be sure to follow the
instructions supplied with the subwoofer.
G Wireless Surround Out
Connection
(for model FW-D5
only)
You may connect the transmitter of the
wireless rear speakers (not supplied)
to the
SURROUND OUT terminal.
Note:
Availability of a wireless transmitter and
its peripherals are subjected to the
approval of local authorities. Please
check with the respective local safety or
approving authority.
CAUTION:
For optimal sound performance, it is
recommended to use the supplied
speakers.
Do not connect more than one speaker
to any one pair of
+
/
-
speaker
terminals.
Do not connect speakers with
impedance lower than the speakers
supplied. Please refer to the
SPECIFICATIONS section of this manual.
D Centre Speaker Connection
(for model FW-D5 only)
Connect the black (non-marked) wires to
the black CENTER terminal and the blue
(marked wires) to the blue CENTER
terminal.
E Rear Surround Speakers
Connection
(for model FW-D5
only)
Connect the black (non-marked) wires to
the black REAR SURROUND terminals and
the coloured (marked) wires to the grey
REAR SURROUND terminals.
H Line Out Connection
(wireless
ready)
You can connect the audio left and right
LINE OUT terminals to a optional CD
Recorder's ANALOGUE IN terminals. This
allows you to record in an analogue format.
You can also install additional optional
front active speakers away from the system
(e.g. in another room) to reduce the
inconvenience of running long speaker
wires across rooms. You can place as many
remote speakers as you like provided they
operate at the same radio frequency.
Connect the wireless radio frequency
transmitter to the LINE OUT terminals.
Place the active speakers at your preferred
location. Be sure to follow the instructions
supplied with the active speakers.
I Connecting other
equipment to your system
You can connect the audio left and right
OUT terminals of a TV, VCR, Laser Disc
player, DVD player or CD Recorder to the
AUX/CDR IN terminals at the rear of the
system.
A AM Loop Antenna
Connection
Connect the supplied loop antenna to the
AM ANTENNA terminal. Place the AM loop
antenna far away from the system and
adjust its position for the best reception.
B FM Wire Antenna
Connection
Connect the supplied FM wire antenna to
the FM ANTENNA 75 terminal. Adjust
the position of the FM antenna for the best
reception.
Outdoor Antenna
For better FM stereo reception connect an
outdoor FM antenna to the FM ANTENNA
75 terminal using a 75 coaxial wire.
C Speakers Connection
Connect the right speaker to Front
terminal R, with the coloured wire to +
and the black wire to -.
Connect the left speaker to Front
terminal L, with the coloured wire to +
and the black wire to -.
Clip the stripped portion of the speaker
wire as shown.
lock
12 mm
unlock
pg 001-41/D5-D1/21-Eng new 6/8/01, 11:32 AM9