Philips FW-D1 Stereo System User Manual


 
3139 115 20054
36
English
TUNER
.
You can cancel manual programming by
pressing
Ç
(on the system only).
During programming, if no button is
pressed within 20 seconds, the system
will exit programme mode
automatically.
Tuning to Preset Radio
Stations
Press í or ë
(or Digit 0-9 on the
remote control)
to select the desired
preset number.
The preset number, radio frequency,
and waveband appear on the display.
Changing the MW tuning grid
(not available for version /30)
The frequency step can be changed if
necessary. In North and South America, the
frequency step between adjacent channels
in the MW band is 10 kHz. In other parts of
the world, it is 9 kHz. The frequency step
presetted in the factory is 9 kHz.
For MW band
To change from 9 kHz to 10 kHz or vice
versa
Changing of tuning grid will erase all
previously stored preset stations.
1 Disconnect the system from the AC
power supply
(pull out the AC power
cord)
.
2 Press TUNER and TUNING á
depressed while reconnecting the
system to the AC power supply.
Display will show "GRID 9" or
"GRID 10".
Notes:
GRID 9 indicates that the tuning grid is
in step of 9 kHz in MW band. GRID 10
indicates that the tuning grid is in step
of 10 kHz in MW band.
FM tuning grid will also be changed
from 50 kHz to 100 kHz or vice versa.
All preset radio stations will also be
erased.
pg 001-41/D5-D1/21-Eng new 6/8/01, 11:33 AM36